五金冲压安全技术措施 在设计冲压五金时，必须满足下列要求：
1) The hardware structure should be
able to ensure that the operation is convenient, safe and reliable, and
the operator can successfully complete the stamping work without
extending his hand, arm and head into the danger zone.
1) 五金结构应能保证操作方便，安全可靠，操作者勿手、臂、头伸入危险区即可顺利完成冲压工作。
2) Debugging, installation, repair, handling and storage are convenient and safe.
2) 调试、安装、修理、搬运和贮藏方便、安全。
Will not cause accidents due to hardware structure problems.
不会因五金结构问题而引发意外事故。
3)
Hardware parts should have enough strength, material selection is
reasonable, hardware should avoid the external convex and concave
unrelated to the function, the external should be chamfered, the guide
column guide sleeve should be far from the operator, the hardware
pressure center should pass or close to the mold handle center line,
guiding, positioning and other important parts, to make the operation
can see clearly.
3) 五金零件要有足够的强度，材料选择合理，五金应避免有与机能无关的外部凸凹，外部应倒棱，导柱导套应远离操作者，五金压力中心应通过或靠近模柄中心线，导向、定位等重要部位，要使操作能看清楚。
4)
When designing hardware, the location of the installation of mechanized
devices should be considered, so as to replace manual operation with
mechanized and automated devices when necessary.
4 ) 设计五金时，应考虑安装机械化装置的位置，以便必要时用机械化、自动化装置代替手工操作。
5) The structure of ejector, ejector and discharge plate must be reliable.
5) 顶件器、推件器及卸料板等结构必须可靠。
6) Do not make the operator feel unsafe.
